BTWP Screw Type Terminal Blocks
The terminals of the BTWP line use the screw type connection technique. The length of insulation to be removed and the tightening torque for each terminal model are indicated in the selection tables.
When the screw is tightened, the resulting pressure deforms the terminal, locking the screw so it will not get loose. This system ensures the final quality of the connection with minimum electric losses.
It is simple to use: remove the isolation from the conductor, insert the conductor into the terminal block and tighten the screw with a properly screwdriver. The length of the isolation to be removed and the tightening torque for each terminal block model is shown in the selection guides.
When the screw is tightened, the resulting pressure causes a deformation in the terminal which locks the screw preventing it from loosening. This system ensures connection and quality with minimum electrical losses.
- Terminal block body in PA66 polyamide, with excellent dielectric properties and high mechanical resistance
- Internal conductor element with high current conduction capacity
- Conical-shaped cable entry to facilitate insertion
- Unlosable screw
- Certification for classified areas (EX, ATEX, IECEX)