• RATED VOLTAGE: 575 V
• Enclosure: IC411 - TEFC
• Output Rating: 40 HP
• Number of Poles: 2
• TERMINAL BOX: Left position

• FLANGE: C
• Output: 40 HP (30 kW)
• FRAME: 324/6TSC
• ALTITUDE: 1000 m.a.s.l.
• AMBIENT TEMPERATURE: -20°C to +40°C
• STARTING METHOD: Direct On Line
• DUTY CYCLE: Cont.(S1)
• TEMPERATURE RISE: 80 K
• SERVICE FACTOR: 1.25
• INSULATION CLASS: F
• DESIGN: B
• MOMENT OF INERTIA (J): 4.90 sq.ft.lb
• LOCKED ROTOR TIME: 39s (cold) 22s (hot)
• BREAKDOWN TORQUE: 240 %
• RATED TORQUE: 59.1 ft.lb
• NO LOAD CURRENT: 8.80 A
• LRC: 6.3x(Code G)
• L. R. AMPERES: 233 A
• RATED CURRENT: 37.0 A
• SLIP: 1.25 %
• RATED SPEED: 3555 rpm
• MOUNTING: F-1
• DEGREE OF PROTECTION: IP55
• FREQUENCY: 60 Hz
• SYNCHRONOUS SPEED: 3600 rpm
• STANDARD: NEMA MG-1
• FRAME MATERIAL: Cast Iron
• IMPREGNATION METHOD: Dip and Bake Polyester
• MAIN TERMINAL BOX HOLE: NPT 2"
• TERMINAL BLOCK: Without
• SHAFT LOCKING DEVICE: Without
• DRAIN: Type T, Threaded
• SHAFT MATERIAL: SAE 1040/45 Carbon Steel
• PAINTING: RAL 5009 202E (ISO 12944 - C4)
• GROUNDING LUGS: Double
• FAN COVER MATERIAL: Cast Iron
• TROPICALIZED PAINTING: According to IEEE-841 (96h)
• FAN MATERIAL: Conductive Plastic
• BEARING CAP: Yes- Bearing Cap
• BALANCING METHOD: 1/2 Key
• DRIP COVER: Without
• OVERLOAD PROTECTOR (PHENOLIC): Without overload protector
• NDE BEARING: 6212 C3
• GREASE TYPE: Mobil Polyrex EM
• LOCKED ROTOR TORQUE: 250 %
• ROTATION: Both (CW and CCW)
• NOISE LEVEL: 76.0 dB(A)
• BEARING TYPE: 6312 C3
• SEALING: Inpro/Seal
• NDE BEARING SEAL: Inpro/Seal

Lorem ipsum dolor sit amet.

Lorem ipsum dolor sit amet consectetur, adipisicing elit. Facilis magni, doloribus illum, rem ipsa temporibus enim natus repellat aut voluptatibus dolore inventore nostrum eaque error unde harum, tempora soluta eum.

• Crossovers: 0 Alternatives
• Category: General Purpose
• Motor Standards:
• Output Power: 0.25 HP
• RPM: 1800
• Enclosure: TEFC
• Voltage: 575 V
• Frame: 63